| AMLS-L3-000290 - The Arista Multilayer Switch must configure the maximum hop limit value to at least 32. | DISA STIG Arista MLS DCS-7000 Series RTR v1r3 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000340 - The Arista router must be configured to restrict traffic destined to itself. | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000350 - The Arista router must be configured to drop all fragmented Internet Control Message Protocol (ICMP) packets destined to itself. | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000370 - The Arista perimeter router must be configured to filter ingress traffic at the external interface on an inbound direction. | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000380 - The Arista perimeter router must be configured to filter egress traffic at the internal interface on an inbound direction. | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000390 - The Arista BGP router must be configured to reject outbound route advertisements for any prefixes belonging to the IP core. | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000400 - The Arista router must be configured to block any traffic that is destined to IP core infrastructure. | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000410 - The Arista router must be configured with Unicast Reverse Path Forwarding (uRPF) loose mode enabled on all CE-facing interfaces. | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000420 - The out-of-band management (OOBM) Arista gateway router must be configured to forward only authorized management traffic to the Network Operations Center (NOC). | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000430 - The out-of-band management (OOBM) Arista gateway router must be configured to block any traffic destined to itself that is not sourced from the OOBM network or the NOC. | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000440 - The Arista router must be configured to only permit management traffic that ingresses and egresses the OOBM interface. | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| ARST-RT-000650 - The Arista perimeter router must be configured to block all outbound management traffic. | DISA STIG Arista MLS EOS 4.2x Router v1r1 | Arista | SYSTEM AND COMMUNICATIONS PROTECTION |
| CASA-FW-000170 - The Cisco ASA perimeter firewall must be configured to filter traffic destined to the enclave in accordance with the specific traffic that is approved and registered in the Ports, Protocols, and Services Management (PPSM) Category Assurance List (CAL) and vulnerability assessments - ACL | DISA STIG Cisco ASA FW v1r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CASA-FW-000170 - The Cisco ASA perimeter firewall must be configured to filter traffic destined to the enclave in accordance with the specific traffic that is approved and registered in the Ports, Protocols, and Services Management (PPSM) Category Assurance List (CAL) and vulnerability assessments - Interface | DISA STIG Cisco ASA FW v1r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000320 - The Cisco perimeter switch must be configured to filter traffic destined to the enclave in accordance with the guidelines contained in DoD Instruction 8551.1. | DISA STIG Cisco NX-OS Switch RTR v2r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000330 - The Cisco perimeter switch must be configured to filter ingress traffic at the external interface on an inbound direction. | DISA STIG Cisco IOS XE Switch RTR v2r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000390 - The Cisco perimeter switch must be configured to block all outbound management traffic. | DISA STIG Cisco NX-OS Switch RTR v2r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000450 - The Cisco switch must be configured to only permit management traffic that ingresses and egresses the out-of-band management (OOBM) interface. | DISA STIG Cisco IOS Switch RTR v2r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000460 - The Cisco router providing connectivity to the Network Operations Center (NOC) must be configured to forward all in-band management traffic via an IPsec tunnel. | DISA STIG Cisco IOS-XR Router RTR v2r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000530 - The Cisco BGP switch must be configured to reject outbound route advertisements for any prefixes belonging to the IP core. | DISA STIG Cisco IOS XE Switch RTR v2r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000730 - The Cisco PE router must be configured to block any traffic that is destined to IP core infrastructure. | DISA STIG Cisco IOS Router RTR v2r6 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000730 - The Cisco PE router must be configured to block any traffic that is destined to IP core infrastructure. | DISA STIG Cisco IOS-XR Router RTR v2r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000730 - The Cisco PE switch must be configured to block any traffic that is destined to the IP core infrastructure. | DISA STIG Cisco IOS XE Switch RTR v2r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000730 - The Cisco PE switch must be configured to block any traffic that is destined to the IP core infrastructure. | DISA STIG Cisco IOS Switch RTR v2r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000740 - The Cisco PE router must be configured with Unicast Reverse Path Forwarding (uRPF) loose mode enabled on all CE-facing interfaces. | DISA STIG Cisco IOS Router RTR v2r6 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000740 - The Cisco PE router must be configured with Unicast Reverse Path Forwarding (uRPF) loose mode enabled on all CE-facing interfaces. | DISA STIG Cisco IOS-XR Router RTR v2r4 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| FNFG-FW-000085 - The FortiGate firewall must filter traffic destined to the internal enclave in accordance with the specific traffic that is approved and registered in the Ports, Protocols, and Services Management (PPSM) Category Assurance List (CAL), Vulnerability Assessments (VAs) for that the enclave. - policy | DISA Fortigate Firewall STIG v1r3 | FortiGate | SYSTEM AND COMMUNICATIONS PROTECTION |
| FNFG-FW-000085 - The FortiGate firewall must filter traffic destined to the internal enclave in accordance with the specific traffic that is approved and registered in the Ports, Protocols, and Services Management (PPSM) Category Assurance List (CAL), Vulnerability Assessments (VAs) for that the enclave. - policy6 | DISA Fortigate Firewall STIG v1r3 | FortiGate | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000380 - The Juniper router must be configured to restrict traffic destined to itself. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000390 - The Juniper router must be configured to drop all fragmented Internet Control Message Protocol (ICMP) packets destined to itself. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000400 - The Juniper perimeter router must be configured to filter traffic destined to the enclave in accordance with the guidelines contained in DoD Instruction 8551.1. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000410 - The Juniper perimeter router must be configured to filter ingress traffic at the external interface on an inbound direction. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000420 - The Juniper perimeter router must be configured to filter egress traffic at the internal interface on an inbound direction. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000430 - The Juniper BGP router must be configured to reject outbound route advertisements for any prefixes belonging to the IP core. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000440 - The Juniper PE router must be configured to block any traffic that is destined to IP core infrastructure. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000450 - The Juniper PE router must be configured with Unicast Reverse Path Forwarding (uRPF) loose mode, or a firewall filter, enabled on all CE-facing interfaces. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000460 - The Juniper out-of-band management (OOBM) gateway must be configured to transport management traffic to the Network Operations Center (NOC) via dedicated circuit, MPLS/VPN service, or IPsec tunnel. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000470 - The Juniper out-of-band management (OOBM) gateway router must be configured to forward only authorized management traffic to the Network Operations Center (NOC). | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000480 - The Juniper out-of-band management (OOBM) gateway router must be configured to block any traffic destined to itself that is not sourced from the OOBM network or the NOC. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000490 - The Juniper router must be configured to only permit management traffic that ingresses and egresses the OOBM interface. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUEX-RT-000770 - The Juniper perimeter router must be configured to block all outbound management traffic. | DISA Juniper EX Series Router v1r3 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000140 - The Juniper router must be configured to drop all fragmented Internet Control Message Protocol (ICMP) packets destined to itself. | DISA STIG Juniper Router RTR v2r4 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000340 - The Juniper perimeter router must be configured to filter egress traffic at the internal interface on an inbound direction. | DISA STIG Juniper Router RTR v2r4 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000380 - The Juniper perimeter router must be configured to block all outbound management traffic. | DISA STIG Juniper Router RTR v2r4 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000390 - The Juniper out-of-band management (OOBM) gateway router must be configured to transport management traffic to the Network Operations Center (NOC) via dedicated circuit, MPLS/VPN service, or IPsec tunnel - IPsec | DISA STIG Juniper Router RTR v2r4 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000390 - The Juniper out-of-band management (OOBM) gateway router must be configured to transport management traffic to the Network Operations Center (NOC) via dedicated circuit, MPLS/VPN service, or IPsec tunnel - Mgmt | DISA STIG Juniper Router RTR v2r4 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000430 - The Juniper out-of-band management (OOBM) gateway router must be configured to block any traffic destined to itself that is not sourced from the OOBM network or the NOC. | DISA STIG Juniper Router RTR v2r4 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000440 - The Juniper router must be configured to only permit management traffic that ingresses and egresses the OOBM interface - Inbound | DISA STIG Juniper Router RTR v2r4 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000440 - The Juniper router must be configured to only permit management traffic that ingresses and egresses the OOBM interface - Outbound | DISA STIG Juniper Router RTR v2r4 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
| JUNI-RT-000710 - The Juniper PE router must be configured to block any traffic that is destined to IP core infrastructure. | DISA STIG Juniper Router RTR v2r4 | Juniper | SYSTEM AND COMMUNICATIONS PROTECTION |
